Toyota Tacoma 3rd Gen

The Tacoma's frontend is good looking from factory and there's so much room behind the factory bumper fascia. Not all of us "need" a full steel bumper. There's a feeling of ease and comfort knowing you are ready for self recovery incase you should get the truck stuck somewhere. Designed and engineered by folks who understand the needs of rigidity and durability in a recovery situation because not all recovery situations are a simple "I'll winch forward" scenario. With the Tacoma's Gross Vehicle Weight Rating of 5,600lbs, there's no room for underbuilt recovery equipment. Our hidden winch mount tucks neatly behind the factory bumper fascia keeping your winch away from the elements. Designed for 12,500lbs+ winches but any winch with less pulling power can be mounted. We recommend 12,500lbs winch minimum for your Tacoma. 

• Arrives Bare Steel - Sanded with 40-grit orbit sand, ready to paint
• Designed to be used as a hidden winch mount or as a base starting point to build your own style bumper by adding wings on the sides 
• 100% Bolt on application 
• 8-factory mounting points (6 to front frame horn, 2 to lower frame)
• Replaces aluminum bumper guard behind plastic bumper
• Protects Cooler Lines
• Mounts behind factory plastic bumper fascia
• Cutting of lower bumper valance is required. Instructions provided with measurements to guide in cutting the plastic valance
• 100%  U.S.A. Domestic Steel 1/4" Plate all around (HEAVY DUTY)
• 3/4" Thick Shackle Tabs extend through the front fairlead plate welded through and all around for 3/4" D-rings w/ 7/8" Pins
• Gusseted and reinforced 
• Mounts winches with standard 10" x 4.5" mounting pattern 
• Package weight: 60-lbs
• Package Dimensions 46" x 20" x 12"
• Flat shipping rate to lower 48-States $81.75. Please contact us for international shipping quotes. 

AVAILABLE TO ORDER. Sliders are built by scheduling the build-out on calendar. Please text/Email or Call to find out which day it can be scheduled to build and ship. 

Weld On Rock Sliders for the Do-It-Your-Selfers and and 4x4 Shops
2" x 6" x .188 Wall Thickness - Sold in Pairs
Slider Measures: 68" Length. If you need a different length (shorter or longer, give us a quick text or email and we'll accommodate accordingly. Extra Charge Applies).
Weight: 45lbs each slider. 
If you add the optional Frame Kickers at time of ordering, the frame kickers and plates will arrive un-welded so you can customize to your own vehicle's frame/unibody as needed. 

A lot more 4x4 owners nowadays are purchasing 2x6 tubes and welding them in the place of their rockers or building their own rock sliders, but taking many shortcuts in design. We've decided to become your supplier for the 2x6 tubes for every do-it-your-selfer out there who would like to build their own. From Jeep Cherokees, Grand Cherokees, Wranglers, Toyota Tacomas, FJ Cruisers, 4-Runners etc.  We DO NOT provide any instructions on how to weld these sliders or where to cut on your vehicle. This is 100% do-it-yourself kit, all we're doing is supplying the steel with the double tapered ends finished and the high-lift jacking notches under the slider welded in. 

If you need frame kickers we can provide those as well for an extra charge at $16 per kicker. The frame kickers will be 1" x 2" x .120 rectangle tubes at 10" length and 1/4" flat rectangle plates with four holes on the corner. If adding frame-kickers you would want to have at least two on each slider, but three per slider is preferred.