Mounts to your vehicle using ten bolts; 5 Bolts on each side which include one factory bolt mounting location which is attached to double stamped steel on the frame rail. . We provide (eight) Grade-8 Serrated Flange Bolts and Serrated Flange Nuts PLUS two Class 8.8 10mm bolts to be used in the factory mounting location.
Heavy-Duty Solid construction will outlast your Jeep.
Bolt on Kit mounts behind your factory bumper cover (bumper fascia) - Retains factory look.
Easy installation can be done by anyone with basic power tool skills.
Made in the U.S.A.
Does not restrict air-flow to your radiator like other winch mounts
Does not extend the front end of your Jeep
The 1/4" Plate Steel Winch Mount will replace the thin sheet metal box on front of your radiator. You are required to cut this box out using a power cutting tool such as an angle grinder or hack saw. This part is also known as cross-member, might also be also known as frame rails.
Requires cutting of plastic bumper. We cut our bumper using a dremel tool.
Winch, fairlead and winch cable/rope not included.
Package measures 36" x 16" x 7" (L x W x H). Weight 40 pounds.
Package includes (1) Winch Mount, (2) winch mounting plates), (2) hood support brackets, (8) Grade-8 Serrated Flange Bolts, (8) Grade-8 Serrated Flange Nuts, (2) Class-10.9 10x1.5x40 Metric Bolts if you don't have the front skid plate, we will verify with you via text. Also included are (5) 1/4" x 3/4" serrated-flange nuts bolts to replace of the factory bumper clips. We will email you a PDF Installation Instruction Manual so you can use it on your phone or tablet with full color photos and detailed installation.
Winch mount, mounting plates and hood support mounts all arrive bare steel fully sanded ready to be primered and painted.